Skip to main content
Loading…
Search Within This
15.05.070 Adoption of International Mechanical Code.
This section is included in your selections.

A. That certain document entitled and known as “The International Mechanical Code, 2018 Edition,” published by the International Code Council is hereby adopted as the mechanical code of the city of Maricopa and made a part of this chapter the same as though said code was specifically set forth in full herein, with changes and amendments to the code as set forth in subsection (B) of this section. An electronic copy of said code shall be filed with the office of the city clerk and kept available for public use and inspection.

B. Amendments to the Mechanical Code.

1. Amend Section 101.1 Title by adding the following in the insert: City of Maricopa.

2. Amend Section 103.1 General by replacing the entire text of that section with the following language:

The Building Official or their designee shall be the person responsible for the enforcement of the provisions of this Code.

3. Amend Section 106.5.2 Fee Schedule by placing the following in the insert at the end:

The City of Maricopa Development Services and Fire/Medical Fee Schedule as approved by City Council.

4. Delete Section 108.4 in its entirety.

5. Amend Section 108.5 Stop Work Orders by deleting all language after the words “unsafe conditions” and replacing it with the following language:

shall be guilty of a violation of this code and subject to the penalties set forth by the authority with jurisdiction for violations thereof.

6. Delete Sections 109.2 through 109.7 in their entirety.

7. Replace Section 309.1 Space Heating Systems with Space-heating and Cooling systems.

Interior spaces intended for human occupancy shall be provided with active or passive space-heating and cooling systems capable of maintaining an indoor temperature of not less than 68°F (20°C) for heating and 80 degrees for cooling at a point 3 feet (914 mm) above floor on the design heating day. The installation of portable space heaters or coolers shall not be used to achieve compliance with this section.

[Code 2004 § 7-1-4-4; Ord. 19-15 § 2; Ord. 18-08 § 1; Res. 18-23.]